Tubular Scaffolding

LENGTH (MM)
500
1000
1500
2000
2500
3000
4000
6000

TUBULAR PIPE

Tubular Scaffolding system consists of galvanised steel pipes that are connected together by couplers and can be erected in virtually any configuration for falsework and working scaffolds. Flexible as a free-standing scaffold, independently-tied scaffold, bird-cage scaffold or suspended scaffold.

Size : 48.3 x 3.2 (MM)

SCAFFOLD METAL DECK

The Scaffold steel plank is an important part of the scaffolding. It is used as a walkway steel plank in the scaffolding system for construction safety. The use of steel scaffold plank avoids the disadvantage of heavy water absorption and extreme slippery caused by rain on wooden scaffold planks.

LENGTH (MM)
1000
1500
2000
2500
3000
4000

BEAM COUPLER

Weight: 1.5kg
Compliance Standard: AS1576.2@2009
Type: Hot Dip Galvanized
Use: Used for attaching scaffold tube to steel beam.

DROP FORGED DOUBLE COUPLER

Weight: 1.0kg
Compliance Standard: EN74-1:2005 Class B, AS1576.2:2009
Type: Hot Dip Galvanized
Use: Forged coupler are used to connect pipe and clamps two perpendicular to each other in a scaffold.

DROP FORGED SWIVEL COUPLER

Weight: 1.15kg
Compliance Standard: EN74-1:2005 Class A, AS1576.2:2009
Type: Hot Dip Galvanized
Use: Forged coupler are used to connect and clamp two pipes perpendicular to each other in a scaffold.

DROP FORGED PUTLOG COUPLER

Weight: 0.65kg
Compliance Standard: AS1576.2:2010, BS1139:2009
Type: Hot Dip Galvanized
Use: Used to connect two tubes at right angle to create transom like supports.

SLEEVE COUPLER

Weight: 1.0kg
Compliance Standard: BS1139-2.2:2009
Type: Hot Dip Galvanized
Use: Sleeve coupler acts as jointer at standard position of tubes to enhance productivity.

LIMPET COUPLER

Weight: 0.35kg
Type: Available in zinc plated
Use: To secure metal deck and lower usage of steel wire.

BASE PLATE

Weight: 1.15kg
Compliance Standard: EN74:1998
Use: Base plate is used with sole
board to provide a flat bearing
surface for even load distribution
of scaffold.